Quisk Version 4.1.77  January 2021
==================================
I added further changes to support the YU1LM designs and the Genesis 3020 QRP rigs. When using the ZZBS Hamlib
command, Quisk now remembers the last frequency and mode. I added back some softrock files that were removed.

Quisk Version 4.1.76  January 2021
==================================
If there are errors when Quisk starts on Windows, the window showing the error messages now stays open
so you can read them. It used to close too fast.

I improved sound buffer levels so they stay closer to 50%. Ben Cahill, AC2YD, contributed code and testing
support. I corrected Quisk C code so no warning messages are produced by the latest compiler.

I fixed the problem with Hermes write queue timeouts on startup. But these will still appear if the Hermes
is not running.

I added back the RTS signal to the Linux serial port CW keying logic. This signal goes high when DSR goes high.
When DSR goes low, RTS goes low after a 1.5 second delay.

Dr. Karsten Schmidt contributed additional logic to the Hamlib serial port. Thanks Karsten!
I added two new Hamlib commands: ZZAG and ZZBS.

Quisk Version 4.1.75  December 2020
===================================
This version includes improvements to the Windows sound code contributed by Ben Cahill, AC2YD, and a fix
to the Macintosh contributed by Christoph, DL1YCF. Thanks!

The pip install method on Linux now builds the Afedri and Soapy modules properly. Please test.

Quisk Version 4.1.74  December 2020
===================================
I added some missing controls to the Hermes-Lite2 Hardware configuration screen. I removed the Alex filter
band screen and implemented the same logic in the regular Bands screen. If you need the Alex screen,
please complain.

Quisk now ships with Linux binary files for Python3, not Python2. If you have Python2, run "make"
to make a Python2 version. You could also start using Python3 instead.

Eric, WW4ET, Davide Gerhard, and Christoph, DL1YCF, provided help to make Quisk run on a Mac. Thanks!
Christoph provided code. Thanks Christoph! The Mac changes may not be complete. Please test.

SdrIQ support was changed. Quisk now uses the hardware file quisk_hardware_sdriq.py instead of sdriqpkg.
The directory sdriqpkg and those binary files are now obsolete. The new code is 100% Python.

Quisk Version 4.1.73  November 2020
===================================
I rewrote the logic for SoftRock I/Q amplitude and phase corrections. The new logic will enable much better
image suppression because it can correct I/Q based on both the VFO and the tuning offset. If you do nothing,
there is no change in the corrections. To use the new logic, enter new correction data. Use the Help button
on the Config/radio/Config correction screens. Corrections are in the file quisk_init.json, and you should
make a copy of this file to save your current corrections.

I added a missing version.h file to SoapySDR. It is not clear that this fixes the version check for the
change in the Soapy API. Please test.

When using the Split button, Quisk now leaves the Rx frequency unchanged and splits the Tx frequency.

I added a new band "Aux1" that can be checked on the Config/radio/Bands screen. It can be used as a special
band for a panadapter or when Quisk is used as a 10.7 MHz IF.

Quisk Version 4.1.72  September 2020
====================================
For SoftRock hardware, the Tx power can now be set for each band. See the Config/radio/Bands screen. I also
added the Tx level and Digital Tx Level sliders to the Config/Config screen, and the Digital Tx power %
to the Config/radio/Hardware screen.

The Y-scale and Y-zero settings are now saved for the graph at the top of the Waterfall screen. These settings
are independent of the settings for the Graph display.

I fixed a problem with the Hermes Lite 2 SWR display. I fixed a problem with SoftRock phase corrections.

Quisk Version 4.1.71  September 2020
====================================
The last band and frequency etc. are saved in the file .quisk_init.pkl, but this binary file can not be
easily read. I am now writing initialization in the new file quisk_init.json, a text file. The location
of this and the other Quisk user files is now shown on the Config/Status screen.

I fixed a bug in the new CW snap-to-peak feature. I added "PTT hang time" and "Tx buffer msec" to the
Hermes Lite 2 hardware screen.

The Graph button can be pressed repeatedly to select display averaging. The Waterfall button can now be
pressed repeatedly to select averaging for the graph at the top. Remember that the Ys and Yz sliders on the
Waterfall screen adjust the waterfall colors. To adjust the graph at the top, hold down the Shift key.

Quisk Version 4.1.70  August 2020
=================================
I speeded up MIDI CW keying on Linux.

There used to be two ways to set the level of Tx audio sent to SoftRock hardware, a slider or the
"Tx audio level" on the Config/radio/Hardware screen. I removed the slider. Please set the level on
the Hardware screen. I removed the 70% limitation and you can now set any level you want.

For CW modes, if you click a peak within the filter bandwidth, the tuning frequency will snap to
the peak. This is an aid to tuning in CW signals. You can still adjust the frequency with the mouse
wheel or by dragging. I also made frequency rounding work with the Rx frequency in split mode.

Quisk Version 4.1.69  August 2020
=================================
Quisk can now use a MIDI device for CW keying. The setup options are on the Config/radio/Timing and CW
screen. Just enter the MIDI name and note number and restart. Performance is good on Windows but poor
on Linux. See my paper http://james.ahlstrom.name/serialports/index.html for measurements.
If you use Linux, try the aseqdump command for testing.

I fixed a bug in the small screen display.

When using "Debug sound" on Windows, I was surprised to find that clicking the console (terminal)
window froze the sound. I had to move all debug messages to an extra window and avoid writing to
the console. This is the oddest Windows "feature" I have seen.

I did some more work on Windows "fast sound" stability, and it runs for hours at my QTH. There
may still be problems on other hardware, so please test.

Quisk Version 4.1.68  August 2020
=================================
I fixed a bug in the S-meter code for very small signals of less than 1E-16. I fixed a bug
in the config screen colors when Quisk can not find the correct color scheme of the system.

I changed the Windows "fast sound" system again. This should offer better performance
and lower CPU usage. Please test by setting "Debug sound" to 1 on the Config/radio/Options
screen.

Quisk Version 4.1.67  July 2020
===============================
I improved the Windows CW operation for SoftRock. Windows sound should now be stable when
using "fast sound". Please test.

I fixed the colors on the config screens when using the "Adwaita dark" theme. The hardware
CW/PTT input now works on voice modes for HiQSDR.

Quisk Version 4.1.66  July 2020
===============================
This version changes the Linux sound system. Soundio is no longer used. Instead I rewrote
the old logic and added fast sound to it. The fast sound is only used for the sidetone.
There is no longer a "fast sound" option on the config screens for Linux.  Please test.
The Windows sound system was not changed. I will work on that next.

Thanks to Dave Roberts I corrected the Soapy module for a recent API change. Thanks Dave!
Thanks to Jaroslav, OK2JRQ, I fixed two bugs in the Python2 version. Thanks Jaroslav!
I added back the waterfall_scroll_mode item from the config file.

Quisk Version 4.1.65  July 2020
===============================
This version should correct the problems with opening soundcards. To open a Delta 44 use the
name "alsa:plughw:CARD=M44,Dev=0". You can use any Alsa name that libsoundio recognizes. There
are other improvements to the sound system to increase stability and reduce CPU usage.

Quisk Version 4.1.64  July 2020
===============================
The favorites button now jumps to the correct screen. The Pulse device "default" now works.
This version should open "fast sound" devices that failed before. Look on the Config/Status
screen to see if all devices open successfully.  If there are still problems, the new debug
messages should add more information. Turn on "Debug sound". Then start Quisk with and
without "fast sound". Save the startup messages.

Quisk Version 4.1.63  June 2020
===============================
This version fixes an incompatibility with Python2 from version 4.1.61. I plan to support Python2
indefinitely, but be advised that Python2 is obsolete. It would be best to upgrade to a 64-bit
version of Python3.

Dave Roberts, G8KBB, provided code to add new FreeDV modes. But the newest 2020 mode requires an
additional shared library that Quisk does not provide. Quisk provides a codec2 but multiple
dependent libraries should be installed in the correct system directories. So to use 2020
you need to install a new codec2 and all its dependencies. Then you can use 2020 with Quisk.

Quisk Version 4.1.62  June 2020
===============================
This version fixes problems with fast sound on Windows. If you are not running Windows there is no
need to update.

Quisk Version 4.1.61  June 2020
===============================
This version fixes a problem with the latest version of wxPython on Windows. Quisk works with all prior
versions of wxPython, but there was a problem with the newest 4.1.0. Buttons did not work properly and
stayed pressed. I think this is a problem with wxPython, but I found a workaround by re-writing all the
waterfall code in C. I do not know if this problem occurs on Linux because my Ubuntu 18 has wxPython
version 4.0.1. But now Quisk should work with any recent wxPython.

Quisk Version 4.1.60  June 2020
===============================
This is a bug fix release.  I fixed a problem with the file record and play buttons.
I fixed a problem with SoftRock CW operation. I make some major changes to softrock/hardware_usb.py.
If you use this file, SoftRock CW should work. If you are using a different hardware file, you should
check the changes and see if you need to modify your file.

Quisk Version 4.1.59  June 2020
===============================
This is a bug fix release to correct some installation problems.

The most recent wxPython version 4.1.0 is not compatible with Quisk on Windows. The buttons do not seem
to show the correct up/down state even though they work. For Windows, please install the last version:

pip install wxPython==4.0.7.post2

For Linux, if you plan to use the new fast sound for sidetone, install libsoundio-dev before installing Quisk:

sudo apt-get install libsoundio-dev

Quisk Version 4.1.58  June 2020
===============================
This version includes a new faster sound system that enables fast CW sidetone and remote CW operation for
the Hermes-Lite2. All the old sound systems are still included, and you can turn the new sound on and off
from the Config/Radio/Timing_and_CW screen. New sound is default off. To use new sound on Linux,
install the libsoundio-dev package with "sudo apt-get install libsoundio-dev" and run "make" to rebuild Quisk.
New sound runs on Windows, but interferes with the screen update. Sometimes buttons appear to stay pressed although
they work fine. Maybe someone can offer a solution.

When using the new sound, adjust your play latency and data poll parameters for best operation. Start with 150
milliseconds play latency and 10000 microseconds data poll.

I fixed a bug with the external demodulation button.  I moved the sound latency timing parameter
from the sound screen to the timing screen.  I removed the top level "Config/Sound" screen because it
was not useful and conflicted with the radio sound screen. The "quisk" command in Windows should now
start Quisk.

Andrea, IW0HDV, provided a patch for the Perseus hardware. Thanks Andrea!
Eoin Mcloughlin, EI7HSB, provided a patch to speed startup time. Thanks Eoin!
Dave Roberts, G8KBB, provided code to add new FreeDV modes. Thanks Dave!
For SoftRock, Quisk will now try the USB backend libusb0 if libusb1 fails. Thanks to Ben Cahill!

I added the "-r" or "--radio" command line option to choose the startup radio.  To get a list of
command line options, use "python quisk.py --help".

Quisk will now save and restore the various record and playback file names. You can now right-click
the temporary playback button to save the sound to a file.

For Hamlib I added additional control items to Quisk's rig2 protocol. The mode PKTUSB sent by WSJT-X is now
recognized and interpreted as mode DGT-U. I also added PKTLSB and PKTFM. I added the level AGC to
control the AGC button, and the level AF for the audio volume. This work makes it easier to add additional
Hamlib controls in the future.

There are a lot of changes in this release. Please report bugs to the N2ADR-SDR group at https://groups.io/g/n2adr-sdr.
A detailed description of the bug would be good. A patch would be even better. If you have problems with this release
remember that you can install the prior version:

To install the prior version on Windows: pip install quisk==4.1.57
To install the prior version on Linux:   sudo -H pip install quisk==4.1.57

Quisk Version 4.1.57  May 2020
==============================
This is a bug fix release. I fixed a bug in the small screen version. I fixed an incompatibility
with the latest wxPython version 4.1.0. I added a patch from Dave Roberts to close FreeDV properly.
Thanks Dave!

Quisk Version 4.1.56  April 2020
================================
For Linux, if the file /usr/include/portaudio.h is absent, portaudio will not be included in Quisk.
This change makes portaudio optional. The change was needed because portaudio breaks wine. Quisk now
restores the correct frequency for the 60 meter band. There were some other bug fixes.

Quisk Version 4.1.55  April 2020
================================
The new Sdr Micron radio was missing from the Windows version of Quisk. There are reports that the item
Hermes_BandDictTx is damaged in the quisk_settings.json file. Quisk will now fix this itself. The item is
the "Tx IO Bus" on the Hermes Bands configuration screen.

Quisk Version 4.1.54  March 2020
================================
There are now two new radios available in Quisk. David Fainitski contributed code for the Sdr Micron,
and Andrea Montefusco IW0HDV contributed code for the Perseus SDR. The radios should appear on the
list of supported radios in Config/Radios screen. Check the Config/radio/Hardware screen to see if you
need any more options. Please test these radios to make sure everything is working.

I added a general way to add new radios to the configuration screens. See docs.html under Custom Hardware.

Quisk Version 4.1.53  March 2020
================================
I changed the Afedri radio module to be compatible with Python3. The graph Zoom feature now is available
on the Bandscope screen. Vladimyr Burdeiny provided a patch to make dx cluster work with Python 3.

I extended the range of the Waterfall color controls Ys and Yz to accommodate hardware with a higher
noise floor such as PlutoSDR. You will have to readjust your waterfall colors.

I added a hardware setting for the LNA gain during transmit for the HL2. I made some changes to the CW
and PTT hardware interface for the HL2. These work great with the HL2, but test the new code if you have
different Hermes hardware such as Red Pitaya.

Quisk Version 4.1.52  December 2019
===================================
I added an On/Off button to Quisk. When Quisk starts the button is "On". When you turn it to "Off",
Quisk shuts down the sound system and closes the hardware. When you turn it "On" again, Quisk starts
with any new setting made from the Config screens. This provides a way to start Quisk with changed settings,
and to re-start your hardware after a power down.

Martin Schaller found and fixed a bug in the Alsa sound system that produced sporadic crashes. Thanks Martin!
Max, G7UOZ, found and fixed a bug in the Python3 SoftRock hardware_net.py code. Thanks Max!
This Quisk includes a more recent FreeDV library in both 32-bit and 64-bit versions. The Windows
SoapySDR interface still requires 64-bit Quisk.

The Config/Status screen now shows the dB level of each open sound device. The maximum level is zero dB.
This is meant as an aid to configuring the sound devices.

Quisk Version 4.1.51  November 2019
===================================
I fixed a bug in the "small screen" code when using the new wx version 4. Thanks to Martin Schaller for
pointing out that underflows from the Soapy sample source should not count as errors.

This version fixes the Linux installation errors "ImportError: No module named _quisk". It also provides
a way to run either Python2 or Python3 quisk when both are installed. To do that use "python2 -m quisk"
or "python3 -m quisk".

The new installation instructions are here: http://james.ahlstrom.name/quisk/docs.html#Installation

Quisk Version 4.1.50  November 2019
===================================
Thanks to Martin Schaller for fixing a bug in the SoftRock Tx sound level. I fixed a bug in the HermesLite
gateware program button traceback.

This Quisk provides pre-built binaries for the Windows Python3 versions. There are now four Windows versions:
Python2 and Python3, each for either 32 or 64-bit Python. If you have a recent Python3, just run your Python3
and use pip to install Quisk. Pip will detect the version of Python you are using, and will install the
correct version of Quisk. If you want to try Python3, install the latest 64-bit version.
The installation instructions are here: http://james.ahlstrom.name/quisk/docs.html#Installation

Quisk Version 4.1.49  November 2019
===================================
Quisk can now program the Hermes Gateware (FPGA flash) over Ethernet. See the button on the radio Hardware screen.
I fixed some more Python 3 bugs.

Quisk Version 4.1.48  November 2019
===================================
I fixed some more problems with the Python3 version of Quisk. I added support for reading and writing the
EEPROM in the HermesLite. Reading the EEPROM requires code version 68 or newer. The EEPROM settings are on
the radio Hardware screen.

Quisk Version 4.1.47  October 2019
==================================
This is a bug fix release. I fixed a problem with the Python 3 version of Quisk saving program state. I
fixed a sound device name problem on Windows.  I added some code provided by Steve to support the HermesLite.

Quisk Version 4.1.46  October 2019
==================================
When using the bandscope screen the band buttons no longer reset the frequency and mode. Try it.
Thanks to Ed, GM3SBC, for changes to the hot key PTT logic. The hot key now works better, and is disabled
when using the config screens.  I changed the FM repeater offset code to increase the level of the CTCSS tone.

I made further progress on Python3 and fixed some resultant problems on Python2. The objective 
is to have a Quisk that runs the same on Python3 as Python2 so you can use either Python. Linux users
can test the Python 3 version by entering "make quisk3" followed by "python3 quisk.py".

Quisk Version 4.1.45  September 2019
====================================
I added a config screen hardware option "Hermes known IP". If you know the IP address of the Hermes
hardware, enter it here. Otherwise Quisk will search for the hardware using the usual broadcast method.

The Python Rx samples interface can now accept bandscope data, that is, raw samples from the ADC. See
the file quisk_hardware_model.py for documentation. I fixed a bug in the bandscope that added noise.

Quisk Version 4.1.44  September 2019
====================================
I made some improvements to the Python Rx sample interface. See quisk_hardware_model.py for the
new interface. I removed the duplicate decimation rates from the SDR-IQ hardware screen.
There are a number of changes to make Quisk run on Python 3, although this is not finished yet.

Quisk Version 4.1.43  August 2019
=================================
This release fixes a bug that resulted in calling the hardware HeartBeat() method too frequently.
This caused flickering of the HermesLite temperature reading.

Quisk Version 4.1.42  August 2019
=================================
I improved the SoftRock amplitude/phase correct screen. I fixed a bug in the Hamlib extended commands
thanks to James, KE4MIQ.

I added an interface to provide Rx samples to Quisk directly from the Python hardware file. Many new SDR
hardware devices return samples by Ethernet, USB or a serial port. Since Python has these three interfaces,
it may be possible to add a new hardware device to Quisk by using Python alone. This is much easier than
adding C code to Quisk. This work was inspired by David, N7DDC, an avid SDR hardware designer.

I am using the new interface to support the SDR-IQ by RfSpace. Change your hardware file to
quisk_hardware_sdriq.py instead of the sdriqpkg directory to use the new logic. The sdriqpkg
directory will be removed in a future release.

Quisk Version 4.1.41  June 2019
===============================
I added Steve's code for the Hermes Lite 2 that moves the harmonics of the switching power supplies
out of the amateur bands. Thanks Steve! I renamed sound devices to have consistent names on all screens.
Stephen Hurd contributed changes to the SDR-IQ module and the Quisk widgets module. Thanks Stephen!
I made the configuration screens for the radios more efficient.  I may have fixed the last of the bugs.
Please test.

Quisk Version 4.1.40  June 2019
===============================
This is a bug fix release for assorted problems.  The filter bandwidth is now saved for program start.
I fixed a buffer overflow in the DirectX code.  I added "Digital output level" to the Config/Sound screen.

I was not able to duplicate a burst of Tx noise when switching to digital modes. But I added code
to fix it anyway.  Please test.

I was not able to duplicate the problem that the Spot output frequency is correct, but the audio is
always transmitted at the center frequency instead of the tuning frequency. Please re-test with this
release, and if it is not fixed I will try again.

Quisk Version 4.1.39  May 2019
==============================
I fixed a bug in the VNA program quisk_vna.py.  The Windows version of SoapySDR is compiled
against SoapySDR version 0.8.0.

Quisk Version 4.1.38  April 2019
================================
The bandwidth of the DC removal filter on the Config/radio/Options screen now applies to all sample
sources, not just sound cards. This is useful to set the bandwidth for SoapySDR devices. For
Hermes Lite, set the bandwidth to zero or one.

I added Rx and Tx sample rate and bandwidth to the SoapySDR hardware screen. Any value can be entered,
not just the values from a list. See the latest SoapySDR news at http://james.ahlstrom.name/quisk/soapy.html.

Quisk Version 4.1.37  April 2019
================================
I added another broadcast address to the Hermes code to fix a network problem. I added an option to
the radio Options config screen to reverse the sideband on Tx. This is needed for satellite operation.
I added the 13, 9, 5 and 3cm bands to the list. I added the additional samples rates 50, 100, 250,
500 and 1250 ksps to accommodate the RedPitaya. The frequency entry box now clears its entry with
each use. You can now specify the bandwidth of the SoftRock DC removal filter on the radio Options screen.

I added some of the SoapySDR transmit parameters on the radio screen. But I am having trouble making
transmit actually work. So transmit is disabled for now.

Quisk Version 4.1.36  March 2019
================================
I added a patch by Franco Spinelli, IW2DHW, to add chk_vfo to the Hamlib control for WSJT-X.
There are further improvements to the SoapySDR radios. I added three Rx gain setting methods
and automatic DC correction. You will need to re-read the SoapySDR device. Just use the
"Change.." button and leave the device name unchanged. This is necessary to read additional
device parameters from the hardware.

Quisk Version 4.1.35  February 2019
===================================
I added the Tx Level to the bands config screen for the Red Pitaya. Now you can set the power level
for each band. I changed the Hermes Lite networking so it works with Virtual Box and multiple
network interfaces. Please test.

I am starting to add SoapySDR support to Quisk. See http://james.ahlstrom.name/quisk/soapy.html.

Quisk Version 4.1.34  January 2019
==================================
This fixes a bug in version 4.1.33 that caused a traceback for b_test1 when using the Small Screen
layout. I also added support for Afedri hardware. Just use the Config/Radios screen and add
a radio of type Afedri.

Quisk Version 4.1.33  January 2019
==================================
I improved the output level control for digital modes. This removes the lag in attaining 100%
level. For the first transmit, Quisk does not know what level to expect from the external digital
source, so there may still be a small delay.

I added a squelch feature that works for SSB and FM. Just push the "Squelch" button. The SSB level
automatically adjusts for band noise, and the default slider value of 0.200 should be close to
what you want.

Quisk Version 4.1.32  January 2019
==================================
I corrected some button colors and colors on the config screens. The green Rx line is now centered
in the filter for Split mode.

Quisk used to leave some headroom in the 16-bit samples it sends to the hardware. The maximum level
used to be about 70%. I changed the maximum level to 100%. So the PEP output for all modes will be
the same level as 100% Spot output. But remember that the PEP level is 100%, not the average level.
An average reading power meter will show a level much below PEP for SSB and digital modes.

There is a new tuning method available. If the Shift key is held down when you left-click the graph,
the Rx filter is centered at that frequency. Normally the Tx frequency is set at the frequency.
This is useful when using narrow digital filters. It can also be used for SSB.

Quisk Version 4.1.31  December 2018
===================================
When using N1MM+, I removed the 10 kHz frequency shift when adjusting frequency. The center will now
shift only if the external frequency control gets within 10% of the left or right edge. Then the
frequency is re-centered.

I fixed the new Windows version handling of Latin-1 accented characters. I added a new "Filters" page
to the Config Radio screens for the Hermes Protocol Alex high pass and low pass filters.

Quisk Version 4.1.30  December 2018
===================================
The Windows installation procedure is different. If you have an old Quisk installed, you should use
the Windows Apps screen to uninstall it. Then install Quisk using Python "pip". See the downloads page
and the new documentation. The new installation method is compatible with standard Python setup tools.
The Linux installation procedure is also different.

I removed the "pyusb" module from Quisk. You will need to install the public version if you need it.
The inclusion interfered with the public version. See the downloads page and the new documentation.
I fixed a bug that happens with multiple displays. The zoom feature now centers in the Rx passband.
This is useful for narrow digital modes.

There are a lot of changes in this version, and the installation method is new, as is the 64-bit
Windows version. If you have any problems or suggestions, please post to the usual groups.

Quisk Version 4.1.26  November 2018
===================================
I added some narrow filters to the digital modes DGT-U and DGT-L. The narrow filters are
centered at 1500 Hertz. This makes filtering in the digital program easier, and is
useful for RTTY. As part of this project I rewrote the filter display logic. Filters are now
more accurately shown, and include the effect of RIT.

The keyup delay on the radio Timing screen used to affect only the CW key. It now works with
the PTT button too.

Quisk Version 4.1.25  October 2018
==================================
I added the option of Quisk CAT control by a software serial port to accommodate N1MM+ logging software.
Set the N1MM radio to "Flex", and enter the port name on the Quisk Config/radio/Remote screen.
You need a "Virtual Serial Port" (VSP) pair. One side connects to Quisk and the other to N1MM.
For Linux, Quisk can set up these ports itself. Pick a port name like "/tmp/QuiskTTY0" on the
Config/radio/Remote screen and enter that name in the external program.  On Windows
you need a VSP that is set up by an external program. This is like the "Virtual Audio Cable"
needed for samples. An Internet search will turn up HDD Software, Eltima Software and many others.
Set up a port pair, and enter one name on the Quisk Remote screen, and the other name in N1MM.
Not all of the "Flex" commands are implemented. If you get any error messages, send them to me.

I moved the split Rx/Tx play menu from the config screen to the Split button so it is easier to change.
I added code from Steve Haynal to control the VersaClock on the Hermes-Lite2.

Quisk Version 4.1.24  October 2018
==================================
I changed the sound logic so that a mic device is no longer needed for digital modes or Spot. The mic
is only needed for voice communications. I added a requested feature to the Config/radio/Keys screen.
I improved the operation on the Raspberry Pi.

Quisk Version 4.1.23  September 2018
====================================
I fixed some more problems with the new Ubuntu 18.04 LTS.

Quisk Version 4.1.22  August 2018
=================================
I fixed the FM squelch so that it works for multiple receivers.

The record to file and play from file logic was simplified and improved. See the Config/Config
screen and the Help button. Quisk can now both record and play an IQ samples file. I removed
the 4 Gig file size limitation inherent in a WAV file so that larger files can be used.

I fixed some of the problems with the new Linux 18.04 LTS. There is still an assertion error when accessing
the config screens. I am trying to work around it, but it seems to be a bug in the gnome desktop.

Quisk Version 4.1.21  July 2018
===============================
I made additional changes for the Hermes Lite 2 project. Control the CW hang time with the
Config/Radio/Timing/Tx_delay_msecs option.  I added a change for the Dx Cluster feature
from YO5RXM. Thanks!

Quisk Version 4.1.20  June 2018
===============================
I made additional changes for the Hermes Lite 2 project. I added a change for the Dx Cluster feature
from YO5RXM. Thanks! I fixed a graph screen flicker problem on Windows.

Quisk Version 4.1.19  June 2018
===============================
I made additional changes for the Hermes Lite 2 project. There are now separate Rx and Tx filter
settings. If multiple receivers are in use, the Rx filter is that of the highest frequency band.

Quisk Version 4.1.18  June 2018
===============================
I added improved code for FreeDV to support the new 700D mode.

Quisk Version 4.1.17  May 2018
==============================
The Quisk VNA program now works with Hermes-Lite 2. Firmware 62 and above is required.
I made additional changes for the Hermes Lite 2 project.

Quisk Version 4.1.16  May 2018
==============================
I updated the built in version of FreeDV digital voice. It now includes newer modes such as 700D.
I added the column for the IO bus to the Red Pitaya radio. I fixed a bug when selecting the
"Bands" screen. I added shortcut keys to the buttons. If a button has an underlined letter,
pressing ALT and the letter will press the button. This is convenient for operation, and allows
Quisk to be controlled by another program that can generate key presses. If you have set a PTT
shortcut key, please check its validity on the radio Keys screen. The shortcut characters for the
band buttons can be changed in the config file.

Quisk Version 4.1.15  March 2018
================================
I changed the logic for the PTT keyboard shortcut. If you are using a PTT shortcut key,
go to the Config/Radio/Keys screen and check the keys you are using.  I made further changes
to support Hermes-Lite. And the "darwin" platform was added to defaults. I fixed the
Status screen flickering that occurred on Windows.

Quisk Version 4.1.14  March 2018
================================
The use of the Spot button for testing has been removed, and proper operation restored.
There are further improvements to the Hermes-Lite power and current calculations, including a
correction to the PA current measurement from Steve.  Thanks Steve!

There is a new "Keys" tab in the configuration screens where you can set one or two hot keys
to press the PTT button.  Space bar seems a popular choice.  I added a toggle option so that
PTT stays on until the next key press.

I made further improvements to wxPython 4.x Phoenix support, but feel free to
continue to use the 3.x version.

Quisk Version 4.1.13  February 2018
===================================
This version is only for TEST.  The Spot button now generates an audio tone from 0 to 5000
Hertz controlled by the sidetone slider.
I added power calculations for the Hermes-Lite project.
Quisk now works with the wxPython 4.0 Phoenix release.  This code is beta, so feel free to
continue to use the 3.x version.

Quisk Version 4.1.12  December 2017
===================================
Sid, G3VBV, updated the documentation file. Thanks Sid! I fixed a network problem with the HiQSDR
on Windows 10.

There is now an easy way to connect Quisk to an external digital program such as Fldigi or wsjtx by
using Linux PulseAudio.  Just set the names pulse:QuiskDigitalInput and pulse:QuiskDigitalOutput
on your radio Sound configuration screen. Quisk will create the necessary loopback devices.  Then
set your digital program output/input to Quisk input/output.  Press the Help button for
documentation, and see the docs.html file for details.

Quisk Version 4.1.11  November 2017
===================================
I added a fix for the Proficio USB frequency control from Stew, N8VET and Tony, VK4KRC.  Thanks!
I changed the Config/Radio/Bands/IO Bus screen to a bit field instead of an integer for the Hermes Lite.
There is a new "Frequency round for SSB" on the radio/options screen.  It rounds the left mouse click
to 1000 Hertz for voice modes on HF.  This is useful when most voice stations are at a multiple of 1000 Hertz.
It defaults to zero, so enter 1000 (or other rounding frequency) to turn it on.
The graph Ys and Yz settings are now saved for each band.

Quisk Version 4.1.10  August 2017
=================================
I added Steve's Quisk updates for version 60 of the HL2 firmware.  Thanks Steve!  I fixed a bug in
the VNA code for HermesLite.  But please note that quisk_vna will NOT work in HermesLite2 until I
have a working HL2 and I port the VNA firmware to it.  Currently VNA requires a Hermes Lite with
firwmare version 32.

Quisk Version 4.1.9  August 2017
================================
The "Display fraction" is ignored for the Bandscope so the whole spectrum is visible.  I added
bandscope support for the Odyssey-2 radio.  I changed the HermesLite2 logic to agree with the
new firmware.  Thanks Steve!  I added logic for the SoftRock to correct for rate differences
between two sound cards.  Thanks to Nick, G3VNC!

Quisk Version 4.1.8  June 2017
==============================
This version adds a bandscope screen for the Hermes Lite.  It uses the raw data
from the ADC to display a 36 MHz wide view of the spectrum.  You do not need to
update to this version unless you have Hermes hardware.

Quisk Version 4.1.7  June 2017
==============================
This version merges all Hermes Lite 1 and 2 features with the regular Quisk distribution.
There is no longer a need for a special Hermes Lite version.  If you have a Hermes Lite 2,
please use the latest firmware with version 40 and up.  The extra data windows and settings for
HL2 will appear when using HL1, but will be invalid.  I will fix this when everyone updates to
the latest HL2 firmware.

Robert, DM4RW contributed a bug fix for CW.  Thanks Robert!

Quisk Version 4.1.6  May 2017
=============================
This version fixes a bug in the small window format of the Hermes Lite 2 screen.
Do not use this version unless you have HL2 hardware.

Quisk Version 4.1.5  April 2017
===============================
This version adds code for Hermes Lite Version 2 to display temperature and current.
Do not use this version unless you have HL2 hardware.

Quisk Version 4.1.4  March 2017
===============================
This version adds code for Hermes Lite Version 2 that was provided by Steve, KF7O.
Do not use this version unless you have HL2 hardware.  It will produce error messages if used with HL1.

Quisk Version 4.1.3  December 2016
==================================
The VNA program quisk_vna.py now works with either the Hermes hardware or the HiQSDR hardware.  The
quisk_vna.py program is part of Quisk.  You need Hermes-Lite firmware 32 or above to use VNA.

I added some defaults for the 137k and 500k bands.  These bands are experimental, so be sure
to set the lower and upper edge on the Config/Radio/Bands screen and follow the rules for your country.

If you set the TX Level for a band to zero, the PTT button is grayed out for that band.  This
is a visual reminder not to transmit on that band.

Quisk Version 4.1.2  October 2016
=================================
This contains a new version of the Quisk Vector Network Analyzer program quisk_vna.py.
The VNA program works with the Quisk hardware and the HiQSDR.  I replaced the correction
logic, added a new Calibrate screen and improved the formatting.

I added a feature to change the Quisk waterfall colors on the Fonts configuration screen.
The new colors were provided by David Fainitski.

Quisk Version 4.1.1  June 2016
==============================
Quisk can now display and tune multiple sub-receivers if your hardware has them.  It currently
works with the Hermes-Lite hardware.  Push the Help button for documentation.  You can tune
sub-receivers to different bands and modes, and play audio from any of them.

You can select diferent color schemes from the Radio/Font configuration screen.

I added code to speed up the display of configuration pages when the Config button is pushed.

For users of the HiQSDR, I added sample rates of 1536 and 1920 ksps.  These are 16-bit samples,
and require recent DL2STG firmware.  I changed the VNA program shutdown messages.

Quisk Version 4.0.5  April 2016
===============================
I added a new column to the Bands screen for transverter offset.  I added the favorites file path
to the Options radio screen.  If you leave this blank, the default is used.  I fixed a bug that
caused a difference in drawing the graph screen between wx 2.8 and wx 3.0.  I added additional
sample rates 1536 and 1920 ksps.

Quisk Version 4.0.4  February 2016
==================================
For radios using UDP (HiQSDR, Hermes, etc.) I added the transmit IP and port number to the
radio configuration screens in order to support multiple radios on the same network.  Leave
these blank for normal operation.  I fixed a drawing error that seems to occur on wx 3.0.

Quisk Version 4.0.3  December 2015
==================================
This is mostly a bugfix release.  It changes Unicode JSON strings to ASCII.
It adds additional PulseAudio features provided by Eric Thornton.  Thanks Eric!

Quisk Version 4.0.2  December 2015
==================================
This is mostly a bugfix release.  It fixes problems with the DX cluster telnet server.
It adds additional PulseAudio features provided by Eric Thornton.  Thanks Eric!

Quisk Version 4.0.1  November 2015
==================================
This is mostly a bugfix release.  It also adds the "Odyssey" radio by David Fainitski.

Quisk Version 4.0.0  November 2015
==================================
This is a major new release of Quisk.  Comments, suggestions and bug reports are welcome.
There is a lot of new code here, but remember that the prior version is still on my web page.

Quisk now has two new screen layouts.  The "large screen" layout is the default, and is designed for
PCs.  It uses the full screen width in order to show as wide a graph as possible, and to make
mouse tuning easy.  The new layout "small screen" is designed for small screens such as touch screens
used for single-board computers.  But "small screen" can also be used by those with sight
impairment, or by those who run Quisk at narrow widths on a PC. It has more button rows;
and the band, mode and screen select buttons are hidden behind three master buttons.  To select
the band, for example, you press the band master button, and a list of bands pops up; then select
the band.  Press the Help button to read the new help file.  Set button_layout = "Small screen"
in your config file; but see below.

If you have written your own quisk_widgets.py file to add custom widgets to the bottom of your
screen, you will need to change this file to accommodate both layouts. See n2adr/quisk_widgets.py
and hermes/quisk_widgets.py for examples.

Quisk now has configuration screens to display and edit its settings.  For most users, this makes
config files obsolete.  Press the Config button and see the additional tabs, and be sure to read the
config help tab.  Furthermore, Quisk can save different settings for different radios.  For example,
you can have a block of settings named HiQSDR and a separate block named SoftRock.  When Quisk starts,
it can ask which radio you want to use.  This feature should appeal to those who have trouble dealing
with config files, and to advanced users with multiple radios.

If you do nothing, Quisk operates as before, and the settings feature does nothing.  You have to
turn it on by making a named block of settings; a "radio".  If you make some changes that
cause Quisk to fail to start, just start Quisk with the "-a" or "--ask" option, and specify
"ConfigFileRadio" as the startup radio.  The "ConfigFileRadio" is the radio as specified in the
config file, and no internal settings are used.  This should not happen, but the code is very new, and
I expect that it needs more work.

The settings screens take the place of config files, although config files can still be used.
After editing settings, it is necessary to restart Quisk to make the settings happen.  Press the
"Restart" button.  Some changes will always require a restart, such as the button layout. But I
expect to make many settings happen instantly without a restart.

Quisk Version 3.7.8  November 2015
==================================
Foreign users can have trouble with their config directory on Windows because the "Documents"
directory is in a foreign language; for example, "Mine Dokumenter".  I changed Quisk to use
the registry to find the name of the "Documents" directory so Quisk should find it in any language.

When playing a CQ loop using the "Transmit sound from WAV file" feature, pressing
hardware PTT will cancel the play loop.

I added the hardware information to the top of the screen.  This is convenient when running
multiple instances of Quisk with multiple hardwares.  I removed the SoftRock status line at
the bottom of the screen.  The same information is in the Config/Config screen and in the
title line at the top.

When operating in Split mode, the RIT control used to only change the Rx channel.  But
that meant that the other Tx channel did not have RIT.  So in CW mode, a station exactly
on the Tx frequency would not be heard.  RIT now works on both channels in Split mode.

The "Record Rx audio" feature now records Tx audio too.  This is useful to record and review
a QSO.

Quisk Version 3.7.7  September 2015
===================================
Eric and I fixed some problems with the PulseAudio code, including problems displaying very
long device names. I reorganized the file quisk_conf_defaults.py to make it easier
to read.  I changed the colors on the Config screen to make the controls look better.

Quisk Version 3.7.6  September 2015
===================================
The PulseAudio code was completely rewritten by Eric Thornton, KM4DSJ.  It now uses
the asynchronous interface. This will:
1)Improve stability/performance. We can now manage latency events how we want to and prevent
ever increasing latency due to CPU load or network delays. latency_millisecs in the quick_conf.py
file will established the target buffer size for playback. Realtime latency for pulse audio
streams is available on the config/status tab.

2)Allow connection to two different PulseAudio servers. The default connection is to the local
machine for normal usage. A separate machine can be specified to pass IQ audio via the network.
This is useful to utilize a Softrock or Peaberry via a raspberry pi or other remote computer.
Specify IQ_Server_IP = "your.ip.here" in your quisk_conf.py to utilize this option. Be sure to
set latency_millisecs to something reasonable (300 works for me over wifi). NOTE: To keep network
congestion down, all modes except CW will "cork" the idle up/down IQ stream.
3)Quisk will attempt to utilize native 16 bit LE format if a PulseAudio sink is configured this way.
Default fallback is Float 32. This reduces network overhead for remote IQ audio streaming while not
losing resolution for any local streams that are configured as floating point. 

Additional changes:
-Remote control of Softrock receivers via usbsoftrock. Add usbsr_ip_address = "your.ip.here",
usbsr_port=port#, and import hardware_net.py in quick_conf.py to communicate with a usbsoftrock
daemon. Start usbsoftrock on the remote machine with the -D option.
-Added a macports target to the makefile to utilize dependency libraries from macports.
This option now allows use of PulseAudio on OSX.

Eric
KM4DSJ


Quisk Version 3.7.5  September 2015
===================================
I changed the code for full-screen mode.  You can now enter window sizes directly.  See
window_width in the file quisk_conf_defaults.py.

I added two more bits to tx_control for the FPGA protocol. I updated the PyUSB
package that ships with Quisk to version 1.0.0b2.

The received characters from FreeDV now appear in the upper left of the graph.  I added
the new FreeDV 700 and 700B modes.  Right-click the FDV button to select the mode.

To make it clear when buttons have added functions, I added a miniature slider to buttons
that can be right-clicked, and a circular arrow to buttons that can be clicked repeatedly.
This can be turned off in your config file.

Quisk Version 3.7.4  August 2015
================================
The Spot button transmits a variable level carrier in all modes, not just SSB.  The new config
file option "spot_button_keys_tx = True" will cause the Spot button to key the transmitter.  The
default is False.  The up button for the Favorites screen used to set the frequency in Hertz,
but the frequencies must be in Megahertz.  The ctcss was also broken.  This has been fixed.

I added a new Hermes-Lite model configuration file hermes/quisk_conf2.py.  This is for
use by people who can program in Python and want to add features to Quisk.  It is set up
to send the Spot button status on the J16 connector.  Quisk now operates in CW mode using
the new Hermes-Lite key input.  For other modes, use the PTT button.  On the Hermes,
use the PTT button with Spot, even for CW.  The CW key always transmits full power CW even
if the mode is not CW.

There is now an option to receive microphone samples from a UDP device.  This is used for
SDR hardware that has a built-in codec.  See quisk_conf_defaults.py.

The FreeDV code was completely rewritten.  It is now simpler, and it is easier to change to a
newer libcodec2.  See the file freedvpkg/README.txt. If anyone is running on Apple OSX, and
has problems, email me, and look at freedv.c.

The config file option graph_width=0.8 sets the width of the graph.  If this is set to exactly 1.0,
Quisk will run in full-screen mode.  This is meant for built-in screens, tablets etc. that lack
window management.

Quisk Version 3.7.2  July 2015
==============================
I made some changes for Hermes-Lite.  You must add rx_udp_clock to your config file.  You can adjust
rx_udp_clock slightly to correct the frequency display.  See hermes/quisk_conf.py.
I added Hermes_BandDict to the config file.  It controls the bits on the J16 connector of the Hermes-Lite.

Quisk will now keep the same filter for a given mode when changing bands.  I added RepeaterOffset() to
the softrock hardware file so that repeater offsets work.  I added mode DGT-FM for digital FM modes.


Quisk Version 3.7.1  July 2015
==============================
This is a bug fix release to correct an incompatibility between my FPGA firmware and that of
Stephen, DL2STG.  He was using the byte in the control record that I used to send the sidetone volume.
I now send the sidetone volume as byte 17.

I added the config file parameter use_sidetone to add/remove the Sto sidetone volume control.  It
used to be necessary to use the hardware file for this.  The default is no sidetone.  To add the
control, add "use_sidetone=1" to your config file.

I fixed a bug in the Audio Plackback button and Hermes-Lite.

Quisk Version 3.7.0  July 2015
==============================
Quisk now supports a new radio, the HermesLite.  If you have a HermesLite, copy hermes/quisk_conf.py
to your config file and modify the copy.  You should only need to change the soundcard names.
If you use Quisk on multiple radios, remember that you can have multiple config files.
Use "python quisk.py -c my_config_file.py" or its equivalent to choose among config files.  This
code is currently under test and may have problems.

The favorites screen now has two more columns for repeater offset and CTCSS tone.  See the file
quisk_conf_defaults.py.  You must set do_repeater_offset=True, and your hardware must be capable
of performing the shift.

The FDV feature is now in "final" form.  Please see freedvpkg/README.txt.  Note that FDV is
a moving target.

There is now an option to send radio sound to a UDP device.  This is used to send radio sound to
SDR hardware that has a built-in codec.  See quisk_conf_defaults.py.

The SoftRock hardware file now supports the key line as a PTT button for voice modes.  Use this if you
have a hardware mic button that you can connect to the key line.

I added the sidetone volume to the HiQSDR control data to accommodate new hardware.  I softened the
volume controls Vol and Sto for a smoother response.  I added the new config file option cw_delay.

Quisk Version 3.6.22 April 2015
===============================
FreeDV is the combination of the codec2 codec and the fdmdv modem.  It provides digital voice
in 1200 Hz bandwidth suitable for HF transmission.  You can use FreeDV by downloading the FreeDv
program from freedv.org, and connecting it to Quisk using the usual digital mode DGT-U.  But now
there is a simpler way.  Quisk has a new mode button FDV.  Just push the FDV mode and talk.  See
http://www.rowetel.com/blog/?page_id=452.

Quisk will add the FDV mode button unless your config file contains the line
    add_freedv_button = 0
If there is a problem with the freedv module, the button will be grayed out.  See README.txt in the
freedvpkg subdirectory for more information.  The "Split" button currently fails with FDV.

With the mouse in the frequency display, roll the mouse wheel to change the digit.

The new config option hamlib_ip specifies the Hamlib IP address; default "localhost".

The IMD button now has a right-click level control like the Spot button.  This is more
convenient than having a few fixed levels.

The Spot button can now transmit a carrier at zero amplitude.  This is useful for testing
the output noise.  If you wrote your own OnSpot() method, level -1 is now Spot button off,
and the level is now 0 to 1000.

Quisk Version 3.6.21 March 2015
===============================
Quisk can now transmit a message from a WAV file.  Record your message at
a high level (near clipping) at 48 ksps, 16-bit, one channel (monophonic).
Then enter the file name on the Config/Config screen.  Press the "File play"
button to transmit.  Quisk will press the PTT button for you, and release it
during pauses.  To interrupt playback, press PTT or release FilePlay so you can answer.

The "Split" button has been replaced with a "Splt" button and a "Rev" button.  The "Splt"
button splits Rx and Tx; and if you click it with the right mouse button instead of the
left, it also locks the Tx frequency so tuning changes the Rx frequency.  The "Rev"
button reverses the Tx and Rx frequencies.  These features were suggested by Mario, DH5YM.

I added a new parameter mic_agc_level to the config file to control the mic AGC.  Input levels
below mic_agc_level are ignored.  The default is 0.1.  Increase this (up to 1.0) to reduce the
AGC range, and reduce it to increase the AGC mic gain boost.

Philip Lee contributed a patch to the PulseAudio code to set the play buffer size.

Quisk Version 3.6.20 December 2014
==================================
Thanks to Graeme, ZL2APV, quisk now changes both channels of a control when using mixer_settings[].
He reports that setting boolean values does not work, but it works on my machine.  More testing
is needed.

The new config file dictionary bandTransverterOffset[] gives the offset in Hertz for bands that are
used with a transverter; for example 144000000 - 28000000 for a two meter transverter.  This
currently works for HiQSDR, SoftRock and SdrIQ.  I also changed the graph X axis code so gigahertz
frequency labels are not too wide.

Quisk Version 3.6.19 October 2014
=================================
Mario, DL3LSM, contributed changes for MacOS support.  Thanks!

I added device names to PulseAudio.  The PulseAudio name "pulse" still refers to the default
device.  Otherwise, enter a PulseAudio name such as "pulse:alsa_input.pci-0000_00_1b.0.analog-stereo".
See quisk_conf_defaults.py or docs.html.  PulseAudio support enables you to connect to recent
versions of wsjt-x.  To turn this off, set show_pulse_audio_devices = False in your config file.

Quisk Version 3.6.18 June 2014
==============================
The Windows installer now works with the new WxPython 3.0.  Previously it required 2.x.
I fixed an annoying sound loop that happened on Windows when quitting Quisk.

The Rx Filter screen now displays the bandwidth of the filter at the 3 and 6 dB points.
I improved the calculation of FFT size for fft_size_multiplier==0. I added more FFT buffers
to improve performance at high data rates.

When you right-click the S-meter, there are new options to change the S-meter time
constant, and to measure the audio voltage.

Quisk Version 3.6.17 June 2014
==============================
Philip G. Lee contributed code to provide native PulseAudio support for Quisk.  You will need
to install the package "libpulse-dev" to compile.  Thanks Philip!

Stephen, K6BSD, provided patches to support FreeBSD.  Thanks Stephen!

The Spot button now works in CW mode with softrock USB hardware. There is a new
slider control for SoftRock transmit level on the Config/Config screen.

The new config file options file_name_audio and file_name_samples are the initial names
for saving audio and samples on the Config/Config screen.
I added more sample rates to support different hardware.

Quisk Version 3.6.16 March 2014
===============================
I re-wrote the CW transmit logic for SoftRock transmitters.  It now implements semi break-in
CW operation.  The config file options are key_poll_msec and key_hang_time.

I added the config file option sample_playback_name to play the raw samples to a loopback or
VAC device.  You can access the raw samples by reading them back with another program.
See quisk_conf_defaults.py.  The sample rate is the same as the hardware sample rate.

Quisk Version 3.6.14 November 2013
==================================
I restored audio to the "Tx Audio" screen.  I increased the digital (DGT-U etc.) transmit
bandwidth to 5 kHz.  The Ys and Yz settings that control the waterfall colors are now
saved for each band.  Just adjust Ys and Yz on a band, and these settings are restored when
you return to the band.

I improved the receive AGC to reduce distortion.  The AGC button now has separate slider values
for On and Off.  Right click the AGC button to set the sliders.  Push the "Help" button to read
the description of the AGC.

I corrected some bugs related to dark color schemes, and added color_bg_txt to control the
slider text on the main screen.

Quisk Version 3.6.13 October 2013
=================================
I added VOX, voice operated relay.  I improved the transmit audio speech processing.  I
added controls for the audio clip and preemphasis levels to the Tx Audio tab of the Config
screen.  Press the "Help" button to read the documentation on how to set your audio levels.

Quisk Version 3.6.12 August 2013
================================
I fixed a bug that produced slight distortion in the transmitted signal.  I added the Enum
type to the mixer control "mixer_settings[]".  Be sure to use a Python float if you want a
decimal fraction 0.0 to 1.0; that is, use "1.0" for 100%, not "1".

The config file now defines hot keys that will press the PTT button when the keys are pressed.

I added a new tab to the Config Screen for testing transmit audio.  You can record and play
back the processed microphone output to hear what it sounds like.  I plan to add audio
controls to this screen in a future release.  I think the record/playback is more useful
than a simple loopback because I find it difficult to talk and listen at the same time.

Quisk Version 3.6.11 July 2013
==============================
I increased the size of the SoftRock status line.

You can now change frequency by left clicking on the digits in the frequency display.  Click on
the upper part of a digit to increase it, and the lower part to decrease it.

I added some GREAT features from Christof, DJ4CM:
  Symbols for buttons.  But you can change back to text with use_unicode_symbols = False.
  Two new buttons for direct entry and recall of items on the favorites screen.
  A new window to display saved stations, favorites and dx cluster data below the frequency axis.
  A feature to query a dx cluster using telnet, and display the stations.
The symbols use Unicode, and were tested on Linux and Windows, and on computers in Germany and the USA.
But if your Windows does not support Unicode, you will need to add use_unicode_symbols = False.
Read quisk_conf_defaults.py (as usual), and look for quisk_typeface, btn_text_, use_unicode_symbols,
sym_stat_, station_display_lines, and dxClHost to see how to use these features by Christof.

Quisk Version 3.6.10 May 2013
=============================
I made some changes to my n2adr hardware and widget files.  I increased the timeout for select()
in the UDP code.  I added a patch from David Turnbull, AE9RB, to make Quisk USB control work with
the Peaberry.  The problem was discovered and solved by ON7VQ.

Windows changes the Documents folder name for different languages, and has no standard way to
find it.  I added "Mine Dokumenter" to the list.

The AGC release time and mic gain control are now parameters in the config file.

I added some features from Christof, DJ4CM: additional color control, double click tune on favorites
screen, and format changes.

Quisk Version 3.6.9 April 2013
==============================
The new config file parameter digital_output_level controls the sound level to Fldigi, etc.
I fixed some small bugs in the Windows DirectX sound system.

When using the Split feature, Quisk can now receive on both the Rx and the Tx frequencies, and play them
in stereo.  When working DX, you can now hear the DX in one ear and the pileup in the other.  I like
the lower frequency signal to be left, and the higher one right.  This is controlled by the new config
file option split_rxtx that can be 1, 2, 3 or 4.  See the file quisk_conf_defaults.py (as usual).

This version of Quisk supports the new features in my HiQSDR FPGA firmware version 1.4.  If you are
using Quisk to set your hardware IP to rx_udp_ip, please be sure that rx_udp_ip_netmask is correct.
The default is 255.255.255.0.

Quisk Version 3.6.8 March 2013
==============================
The new config file parameter button_font_size can be changed to reduce the size of the button font.
This is useful for a netbook when the lower screen resolution results in crowded buttons.

There is a new button "Notch" for an automatic notch filter to get rid of carriers in SSB signals.  It
works in CW too, but is less useful because the sharp filters can get rid of unwanted signals.  The "Notch" 
is an advanced feature based on the FFT and not the LMS algorithm.

Quisk Version 3.6.7 February 2013
=================================
I added a check for the correct wx version.  Thanks to Mario, DH5YM.  Selecting "Config/Favorites/TuneTo"
now changes to the configured default_screen instead of the waterfall screen.  Thanks to Detlef, DL7IY.
The mute button and volume now controls only the radio sound, and not the digital output.  Thanks to Mario, DH5YM.

Previously, Fldigi XML-RPC control only worked if a digital mode was selected and a digital audio device
was specified.  Now it is always active unless you turn it off in the config file.

The transmit power level and the digital transmit power level can now be adjusted on the config screen.  The
levels are a percentage of tx_level as set in the config file.  The meaning of digital_tx_level was changed.
It is now the maximum percentage value for the slider.  Thanks to Hubert, DG7MGY.

There is a new feature to save frequencies and return to them.  When you have tuned in a signal of interest,
press the "Save" button to save the frequency, band and mode.  Repeat for more signals.  Now press "Next",
to switch to the next saved signal, and press "Next" repeatedly to cycle through the list.  To delete a
saved signal, first tune to it with "Next" and then press "Delete".  If you save a large number of signals,
right click the "Next" button, and you will get a popup menu so you can jump directly to a station.  Thanks
to Detlef, DL7IY.

I had to renumber the columns for the Quisk buttons. That won't matter to you unless you add your own widgets
to the bottom of the screen by importing your own quisk_widgets.  Then you will need to renumber your columns.
See n2adr/quisk_widgets.py for an example.

Quisk Version 3.6.6 January 2013
================================
I corrected the frequency measurement feature so it works with RIT.  This feature was successfully
verified in the November 2012 ARRL Frequency Measurement Test.  I fixed a bug in Fldigi frequency
control thanks to Hubert, DG7MGY.

The config file has a new parameter mouse_wheelmod to control the mouse wheel
sensitivity.  Thanks to DG7MGY for the patch.

I changed the digital filters so they have a bandwidth up to 20 ksps.  This accommodates more digital modes.
There are now three digital modes: DGT-U and DGT-L decode the audio as upper or lower sideband.  The old
DGTL mode is now DGT-U.  The mode DGT-IQ does not decode.  It sends the I/Q samples directly to the
sound card device.  It is interesting to listen to the DGT-IQ signal, as it provides binaural reception.
Also, the PTT can be controlled by either Quisk or Fldigi, not just by Quisk.

There is a new tab on the Config screen where you can enter the frequencies and modes for favorite
stations.  This can be used to list and tune to repeaters or nets.  The page works like a spreadsheet.
Fill in the rows with an arbitrary name, the frequency as integer Hertz or decimal megahertz, the mode and
an arbitrary description.  Right click on the left row label for a popup menu that allows you tune to that
row.  Thanks to Brian KF7WPK for suggesting this feature.

Quisk Version 3.6.5 November 2012
=================================
I added a waterfall method ChangeRfGain() that enables you to keep the waterfall colors constant
for changes in the RF gain control.  See my n2adr directory for an example of how to use it.

I added the ability to connect Quisk to the hamlib rigctld daemon.  This enables Quisk to work
with any rig compatible with hamlib.  For an example, see quisk_conf_kx3.py.  Push the Help button
for documentation.

I added a feature to measure the frequency of a continuous RF signal.  Right click the S-meter window
to turn it on.  Push the Help button for documentation.  It is meant for precise frequency measurement
such as would be needed to characterize crystals for a filter.  Precision is 0.01 Hertz.

Quisk Version 3.6.4 September 2012
==================================
I added Hamlib control to Quisk.  Set your digital or logging program to rig2,
device localhost:4575.  See the Help and docs.html.  This is used to control Quisk
from other digital mode programs such as WSPR.

I added the Y scale to the graph above the waterfall.

Quisk can now record the speaker audio and the digital samples to a WAV file.  Set the
file names using the config screen, and then use the "FileRec" button to start recording.
Press the Help button for more information.

Quisk Version 3.6.3 July 2012
=============================
Thanks to Steve Murphy, KB8RWQ for the patch adding additional color control, and for his 
dark color design. 

I am using Quisk with my AR8600 receiver 10.7 MHz IF output as a general coverage receiver.
My config file is n2adr/quisk_conf_8600.py.  This covers the VHF and UHF bands, and so
I needed to add some FM repeater and scanner features.  I added a Squelch button for FM.
Right-click the button to adjust the squelch level.  The Squech and AGC buttons
are combined to save space.  The new configuration file items freq_spacing and
freq_base are used to round frequencies to channel spacings on VHF.  There is scanner
logic in my config file.  You should look at this if you use Quisk with a transverter for
the higher bands.  With my hardware it is able to scan known repeater frequencies jumping
across bands as it scans.  The 960 ksps rate of Quisk and HiQSDR is very useful at VHF
and higher.

I added tabs to the config screen, and cleaned it up.

I added a record and playback button.  Press Record to start a new recording of radio
sound.  The maximum recording length is set in the config file, and the default is 15
seconds.  After this limit, the most recent 15 seconds of sound is retained.  To play
the recorded sound, press the Play button.  If you are transmitting, the recorded sound
is transmitted provided the microphone and playback sample rate are both 48000 sps.  The
transmitted recorded sound is not subjected to the usual audio processing.  That means
that you can play another ham's audio back and give him/her a good idea of how it sounds.

Quisk Version 3.6.2 May 2012
============================
I added a display of the filter bandwidth to the graph screen.  This is based on code
provided by Terry Fox, WB4JFI.  Thanks Terry!  See the file quisk_conf_defaults.py.

I added detailed information on each sound device to the config screen.  The Test
button now generates AM and FM as well as CW and SSB.

The receive filtering has been re-written to improve the shape of the filters and to
reduce the CPU time.  Quisk now runs on my fan-less Shuttle Atom machine at speeds
up to 480 ksps.  The CW filters are particularly nice.

Quisk Version 3.6.1 April 2012
==============================
There is a new "DGTL" mode to send Quisk audio to an external digital mode program
such as Fldigi.  Read the file quisk_conf_defaults.py to see the new config file
options available.  Use the Help button for basic information, and see docs.html.

I changed the 60 meter operation to agree with new FCC rules (for the USA).  See
the configuration file for items to control 60 meters.

Quisk Version 3.6.0 March 2012
==============================
There are no new user features in this release, and no changes to the HiQSDR code.
This version adds a new feature for those writing C-language extension modules
that need to access C code from the _quisk extension module.  Examples are the
SDR-IQ and the Charleston extension modules.  This feature was requested by
Maitland Bottoms, AA4HS, and he also provided patches.

Previously, symbols from the _quisk module were linked to sub-modules with the
C linker.  Now _quisk exports symbols using the Python CObject or Capsule
interface.  The documentation is in import_quisk_api.c.  Only minimal changes
to extension modules are required, as most changes are in _quisk.  The linker
method still works on Linux, but the new interface is highly recommended.

Quisk Version 3.5.12 February 2012
==================================
There are no changes to Quisk, but this version includes the new Quisk VNA program
that enables you to use my original transceiver hardware and the newer HiQSDR
hardware as a vector network analyzer.  Use "python quisk_vna.py" to run it.

Quisk Version 3.5.11 December 2011
==================================
I fixed a bug that caused the microphone to freeze when sending the mic sound to
the SoftRock for transmit.

Quisk Version 3.5.10 December 2011
==================================
Lucian Langa contributed a patch to return the primary display size for dual
displays.  If you decreased graph_width for dual displays you will need to change it
back to 0.80 (or similar).

I improved the transmit audio filters to reduce spurs and decrease processing time.
The mic sample rate can now be either 48000 (as before) or 8000 samples per second.
The plan is to make Quisk run effectively on small laptops or even tablet computers.
Remember to adjust mic_clip and mic_preemphasis in your config file.

Quisk Version 3.5.9 November 2011
=================================
I fixed a bug in Windows that occurs only when using the mic for transmit.

Quisk Version 3.5.8 October 2011
================================
The Windows version is now equal to the Linux version, and transmits properly.

I added a parameter agc_off_gain to the config file.  It controls the audio gain
when AGC is off.  Reduce it if sound with AGC off is too loud.  Note that even with
AGC off, the output is limited to the clip level.  I made some other improvements to AGC.

I added FM transmit.  The modulation index can be set in your config file.

I made some improvements to demodulation, and to the SSB transmit filter.   I fixed an
array out of bounds bug in transmit.

Quisk Version 3.5.7 September 2011
==================================
This is a quick release to fix two bugs in 3.5.6, the message "expected integer" and
faint audio for FM.  I also added a new parameter agc_max_gain to the default
configuration file to control the scale of the AGC slider.

Quisk Version 3.5.6 September 2011
==================================
The Spot button now has a level adjustment instead of fixed values.  Right-click the
button to adjust.  There are now three buttons with a slider adjustment, namely AGC,
Spot and the right-most filter button.

I added a feature to measure and remove any DC component in the UDP samples.  I fixed a
problem with the waterfall display when zoomed and using band up-down.

There is a new adjustable  AGC control.   Right click it to show the slider adjustment.  The
full up position corresponds to the old AGC 1.

I removed the 1650 Hertz offset when transmitting SSB.  It was not necessary and cluttered the code.

Quisk Version 3.5.5 July 2011
=============================
These changes only affect the N2ADR 2010 transceiver and the improved version, the HiQSDR.

I moved all the files into a new package directory hiqsdr.  The old n2adr directory
has only the special files I use at my shack.  Please change your config file as follows:

from hiqsdr import quisk_hardware		# Special hardware file
use_rx_udp = 1	# Use this for the N2ADR-2010
use_rx_udp = 2	# Use this for the HiQSDR

The sample config file quisk_conf.py in hiqsdr can be used as is for the HiQSDR.
There is a new dictionary tx_level in the config file to set the transmit level.  See
quisk_conf_defaults.py for other features that can be set for the HiQSDR.

There is a new FPGA firmare version 1.1 available to support the new HiQSDR features.
Note that your firmware version is shown on the Config screen.  It is not necessary to
update your firmware unless you use the HiQSDR and you want the new HiQSDR control lines
to work.  If you do update your firmware, you must run Quisk 3.5.5 or later.

Quisk Version 3.5.4 June 2011
=============================
I added another slider labeled "Zo" to zoom (expand) the graph screen scale
so that narrow signals can be examined.  The center of the graph is changed
to the tuning frequency when zoom is turned on.  To cancel zoom, move the
slider back to the bottom position.  You can tune as usual even if zoom is on.

I put the band buttons on one line so I could add more control buttons.

Quisk Version 3.5.3 May 2011
============================
I added "Documents" as a possible config file location (for Windows 7).

These changes are specific to my 2009/2010 transceiver hardware:
I now detect and display the firmware version.  The files conf_transceiver.py
and hardware_transceiver.py are now the basic config and hardware files for my
transceiver.  The spot button now appears without a special widgets file, so no
widgets file is necessary.  The file quisk_hardware.py is still the hardware file
used in my station, but it is mostly useful as an example of what is possible,
not as a starting point for use by others.


Quisk Version 3.5.2 April 2011
==============================
I added code from Ethan Blanton, KB8OJH, to provide direct frequency control
of the Si570 chip in many SoftRocks.  I added AM transmit and improved AM
receive.  I added FM de-emphasis to receive.  I added a noise blanker.

It is now possible to delay samples (tx_channel_delay) and correct the amplitude
and phase for the sound card play device (SoftRock transmit).  Unfortunately
receive sound card corrections will need to be re-entered.

The filter bandwidths for each mode can now be set in the config file.  And
you can right-click the right-most filter button to adjust its bandwidth.

Quisk Version 3.5.1 February 2011
=================================
The phase correction control has been improved to allow multiple correction
points per band.  Unfortunately this will require re-entering corrections.

I added mic_preemphasis and mic_clip to the config file to control Tx audio processing.

Quisk Version 3.5.0 January 2011
================================
Starting with this version, a Windows version of Quisk is available (alpha code).
I changed the amplitude/phase correction control, and added config file
options (rx_max_phase_correct) to control the maximum available correction.

Quisk Version 3.4.14 January 2011
=================================
The "alsa:" names can now be used for mixer settings.  I added simplified
config and hardware files for my 2010 transceiver hardware. I moved the one
sample delay for some sound cards into the config file instead of using the
#define FIX_H101 (which remains for backward compatibility).  I added more
buttons "GraphP2" to the Graph button to activate a peak hold function.  There
are config file options graph_peak_hold_1 and _2 to control the time constant.

Quisk Version 3.4.13 December 2010
==================================
I decreased the microphone speech processing preemphasis and clipping.
I added a config parameter key_poll_msec to control the SoftRock USB
poll for key status.  I improved the config screen.  Alsa names can
now be strings like "alsa:NVidia" that match the card/device info.
Thanks to Joachim Schneider, DB6QS, I made some improvements to SoftRock
USB control.

Quisk Version 3.4.11 November 2010
===============================
Thanks to Sid Boyce, G3VBV, for sending me SoftRock hardware to work with.
The "mic_play" logic was re-written so that transmit I/Q samples can be
sent from a sound card to hardware that uses QSD up-conversion.  I added
USB access through pyusb to control recent SoftRock models.  A new package
"softrock" directly supports several SoftRock models.  

Change Spot Button to transmit at carrier frequency.

Add a Split button to enable split receive and transmit frequencies.

Fix band change data for pan adapter users.

Try to make easy_install work better.

Quisk Version 3.4.8 August 2010
===============================
A new config file option "playback_rate" can set the radio sound play rate.

I added a button to the config screen to change the decimation rate for
hardware that supports this.  See the new "VarDecim" methods in
quisk_hardware_model.py.  I added this feature to the SDR-IQ hardware
file sdriqpkg/quisk_hardware.py, and to n2adr/quisk_hardware.py.

Thanks to John Nogatch AC6SL for a bug fix.

Quisk Version 3.4.6 July 2010
=============================
I improved the mouse tuning by eliminating a tendency to tune backward.

I made the sdriq extension and my n2adr code into packages in the directories
"sdriqpkg" and "n2adr".  The new package architecture will make it easier for
authors to write Quisk extensions.  See the example config files quisk_conf_sdriq.py
and quisk_conf_n2adr.py to see how to change your imports:

  from sdriqpkg import sdriq
  from sdriqpkg import quisk_hardware
  from n2adr import quisk_hardware
  from n2adr import quisk_widgets

Thanks to Terry Fox, WB4JFI, for improvements to Quisk:
    Code to support the Charleston hardware (libusb-dev required).
    Code to add a third FFT data block.

Quisk Version 3.4.3 June 2010
=============================
The hardware open() method now returns a string for the config screen.  If
you have a custom hardware file, create a string or return the base class string.

I made the SDR-IQ code into a separate Python extension module "sdriq".
This module can serve as a model for other hardware extensions.  It is
the model for the Charleston hardware extension module.  The sdriq.so
file needs _quisk.so, so put both in the same directory.

I corrected the decimation for sample rates greater than 240 ksps, and
improved the filters for all decimations to reduce "images".

The following changes are only relevant if you use the SDR-IQ for capture:

  You need to add these lines to your config file (see quisk_hardware_defaults.py):
        import quisk_hardware_sdriq as quisk_hardware
        display_fraction = 0.85
  There is now a special hardware file for the SDR-IQ.  If you have a
  custom hardware file that uses the SDR-IQ you need to use
  quisk_hardware_sdriq as its base class (instead of quisk_hardware_model).

[See version 3.4.5 for further SDR-IQ changes]

Quisk Version 3.4.2 May 2010
============================
The config file has a new option to add an external demodulation module.  I
I added the ability to play in stereo, and corrected the sidetone logic.

The config file has a new option to add a full duplex button.

I added the ability to use PortAudio for sound card access.  PortAudio
can also be used to connect Quisk to other programs.

I added a key up delay to the is_key_down() serial port code and fixed a
sound card CW bug.

A new config file entry can make amplitude/phase corrections independent
of band.  This is needed for a panadapter.

I fixed the compressed graph labels at high sample rates.

Quisk Version 3.3.7 April 2010
=================================
If you get samples from a UDP port, you can specify the decimation rate in the
config file.

If you send samples to a sound card for transmit, CW now works (as does SSB).

Quisk Version 3.3.6 February 2010
=================================
I added BandEdge to the config file, and added code to Quisk to make the
frequency and band changes more rational.  I changed the config file
attribute freqTime to bandTime (see changes).

You can now define a class named "Hardware" in your config file, and then
you don't need a separate hardware file.  This is only recommended for
simple hardware needs.  See docs.html.

If you use the microphone and send samples with UDP, the audio is now
centered at 1650 Hertz, and you must add/subtract this offset when
setting the transmit frequency.

A number of valuable patches were submitted by Andrew Nilsson, VK6JBL,
and these were incorporated into Quisk:

  The band buttons displayed can be changed in the config file (bandLabels).

  The 6 meter band was added (change bandLabels to show it).

  Turn on add_imd_button in the config file to generate 2-tone test signals.

  The two new functions QS.capt_channels(i, q) and QS.play_channels(i, q)
  will set the capture and playback channel numbers at any time.

  If you set the key method to "", the new function QS.set_key_down(1) will
  set the key state up or down.  This enables you change the key state using
  either C or Python; for example, to add a "MOX" button.

  The microphone samples can now be output to a sound card for transmit.  See
  the additional items in the config file.

  The new config file parameter mouse_tune_method causes mouse drag tuning
  to change the VFO frequency, not the Quisk tuning frequency.

I moved microphone_name and tx_ip (for the microphone) to the config
file from the hardware file so that all the mic parameters are together.

Quisk Version 3.3.1 December 2009
=================================

For sound card input, I added controls to correct amplitude and phase
balance.  Press the new button on the config screen.  A different
correction is saved for each band.  See the help file.

I added the new band "Audio".  It sets the VFO frequency to
zero and is meant to be used with a sound card.  I changed the WWV and CHU
bands to a new Time band.  The time frequencies are named freqTime and can
be changed in your config file.

In the file quisk_conf_defaults.py I changed the default for persistent_state
to True, and added graph_width=0.8 to specify the graph width.

A period "." in the frequency entry box means megahertz.

Quisk Version 3.3.0 November 2009
=================================

I fixed a bug in the SDR-IQ decimation that produced slight audio
distortion at decimations other than 500.

If the play device is the null string "", Quisk no longer tunes and
demodulates the signal.  This saves CPU cycles when Quisk is used
as a panadapter.

I added decimation (reduction of sample rate) before the filters so that
Quisk can handle higher sample rates or slower computers.

I made the waterfall into a splitter window with a graph display at the top.
There are new attributes in the config file to control this feature.

The numeric value of Ys and Yz are now shown so that the values can be added
to the config file more easily.

There is a new config option to save the state (band, frequency, etc.) on
exit, and restore it on startup.  Only certain bits of state are saved; the
others are still taken from the config file.

The default config file sets fft_size_multiplier to zero, and this specifies
that Quisk should calculate it for you.

Quisk Version 3.2.3 September 2009
==================================

Fixed a bug that prevented tuning the SDR-IQ when using the
default hardware file.  Started adding code to capture sound
from a UDP socket.

Quisk Version 3.2.2 June 2009
=============================

The microphone access was re-written to make it work with more
sound cards.  The config file has a new parameter "mic_channel_I"
to specify which sound card channel is used for the mic.

Added Documentation.html.  Fixed lack of poll to ReturnFrequency().

Quisk Version 3.2 May 2009
==========================

Quisk now uses wxPython instead of Tkinter for its graphical
user interface.  You must install the python-wxgtk2.8 package.
Get the latest version available.  If you still want to run
the Tkinter version, it is quisk_tk.py.  The wxPython version
is much faster.

Quisk now runs in two threads; a GUI thread and a sound thread.

I moved the colors to the config file so you can change the
colors more easily.


Quisk Version 3.1  April 2009
=============================

New hardware file to control the AOR AD8600.

I added filtering to FM audio to remove CTCSS tones and provide
-6 dB / octave de-emphasis.

I removed the tkdirect C-language module and replaced it with a
pure Python equivalent.  This reduces compilation problems.

I improved the speed of the screen updates so that Quisk will run
without clicks on slower computers.


Quisk Version 3.0.0  April 2009
===============================

Thanks to Leigh L. Klotz, Jr. WA5ZNU, my special hardware control was
removed to separate files so that Quisk now has a cleaner design that
is more useful to others.

