ubuntustudio-controls (1.13) groovy; urgency=medium

  * Replaced by Studio Controls

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Wed, 13 May 2020 08:14:19 -0700

ubuntustudio-controls (1.12.6) groovy; urgency=medium

  [ Len Ovens ]
  * remove tablet code to fix (lp: #1867705)

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Fri, 08 May 2020 13:56:28 -0700

ubuntustudio-controls (1.12.5) groovy; urgency=medium

  [Len Ovens]
  * Check if device has a description before trying to use it (lp: #1872187)

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Wed, 29 Apr 2020 08:34:59 -0700

ubuntustudio-controls (1.12.4) focal; urgency=high

  [ Len Ovens ]
  * Fix USB bridge checkbox so it actually changes states (LP #1872250)

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Sun, 12 Apr 2020 17:58:04 -0700

ubuntustudio-controls (1.12.3) focal; urgency=medium

  * Remove symlink creation from postinst, make relative symlinks

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Mon, 02 Mar 2020 20:58:50 -0800

ubuntustudio-controls (1.12.2) focal; urgency=medium

  [ Len Ovens ]
  * Hide tablet GUI until next cycle

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Sun, 01 Mar 2020 16:05:13 -0800

ubuntustudio-controls (1.12.1) focal; urgency=medium

  * Fix for inappropriate useradd in ubuntustudio-system (should be usermod)

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Sat, 29 Feb 2020 15:00:37 -0800

ubuntustudio-controls (1.12) focal; urgency=medium

  [ Len Ovens ]
  * Check if device really has gone on device removed signal
  * Save last valid internal device
  * Move config file to it's own sub directory to allow more files
  * Refactor PA bridging
  * Add Xrun counter and reset button
  * Properly stop zita-ajbridge with SIGINT instead of SIGKILL
  * Read zita-ajbridge return value to avoid zombie processes
  * Split audio setup page into three tabs
  * Allow user to name Pulse bridges
  * Fix error with no pulse bridge
  * Make pulse bridge connections into a drop down
  * Removed inoperable firewire backend - use ALSA
  * Use log levels for logging
  * move to systemd starting for autojack
  * Make sure session shuts down on logout (LP #1860152)

  [ Brian Hechinger ]
  *  NO-OP: Updated formatting for PEP8
  * Converted config file handling from home-grown to configparser  

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Sun, 19 Jan 2020 21:09:53 -0800

ubuntustudio-controls (1.11.3) eoan; urgency=medium

  [ Len Ovens ]
  * The zita bridge should not have a latency less than 64 samples (LP #1844706) 

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Thu, 19 Sep 2019 10:17:47 -0700

ubuntustudio-controls (1.11.2) eoan; urgency=medium

  [ Len Ovens ]
  * Set zita-ajbridge to a sample rate the device supports (LP: #1843926)

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Tue, 17 Sep 2019 14:55:40 -0700

ubuntustudio-controls (1.11.1) eoan; urgency=medium

  [ Len Ovens ]
  * Don't run Carla if it is not installed (LP: #1842012)

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Thu, 29 Aug 2019 19:59:21 -0700

ubuntustudio-controls (1.11) eoan; urgency=medium

  [ Len Ovens ]
  * Fix devices with no name cause crash (LP: #1841451)
  * Raise version check for autojack to make sure new one is started 

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Tue, 27 Aug 2019 09:50:10 -0500

ubuntustudio-controls (1.10) eoan; urgency=medium

  [Len Ovens]
  * Change all subprocess from string to array and shell=False
  * Add ability to set i/o channel count
  * Made sure each backend only gets parameters it can handle
  * Allow auto bridged USB devices to be input only

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Thu, 18 Jul 2019 14:18:25 -0700

ubuntustudio-controls (1.9.1) eoan; urgency=medium

  * Demoted carla from depends to recommends

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Thu, 13 Jun 2019 11:07:41 -0700

ubuntustudio-controls (1.9) eoan; urgency=medium

  [ Len Ovens ]
  * Default devices must be valid devices (LP: #1822463)
  * Removed Jack autostart checkbox
  * Added Jack Running indicator
  * Fixed change log chronology
  * Added jack backend setting
  * Use Jack state on start up
  * Update dbus usage
  * Allow for more than one pulse-jack bridge
  * Add QASmixer, Pulse and Carla start buttons
  * Monitor jack with call back gives less logfile noise
  * Make sure autojack is synced with GUI

 -- Erich Eickmeyer <erich@ericheickmeyer.com>  Tue, 28 May 2019 14:54:22 -0700

ubuntustudio-controls (1.8) eoan; urgency=medium

  [ Len Ovens ]
  * Add to ROADMAP next steps

  [ Ross Gammon ]
  * Set check box status correctly from config file (LP: #1826413)

 -- Ross Gammon <rossgammon@debian.org>  Fri, 26 Apr 2019 15:34:52 +0200

ubuntustudio-controls (1.7) disco; urgency=medium

  [ Len Ovens ]
  * Fix double daemon startup (LP: #1798927)
  * Fix governor setting over boot (LP: #1809024)
  * Remove file left over from before
  * Properly ecape variables in logger lines
  * Do not set group if UID is less than 999
  * Change Latency to Buffer size (LP: #1815240)

 -- Ross Gammon <rossgammon@debian.org>  Mon, 18 Feb 2019 21:51:15 +0100

ubuntustudio-controls (1.6) cosmic; urgency=medium

  [ Ross Gammon ]
  * Bump standards version to 4.2.1, no changes required
  * Set distribution to cosmic

  [ Len Ovens ]
  * Make sure /lib files get installed (LP: #1791457)
  * Make GUI's default match backend (LP: #1791459)

 -- Ross Gammon <rossgammon@debian.org>  Sat, 06 Oct 2018 17:56:37 +0200

ubuntustudio-controls (1.5) cosmic; urgency=medium

  [ Len Ovens ]
  * Rewrote so that GUI does not run sudo.
  * Added functionality to Audio settings
  * GUI correctly writes file, jack starts and connects to pulse
    correctly
  * fix not loading values from rc file, zita likes lower buffer size
  * fix jack checkbox, fix extra device reading from rc file
  * Add readme file
  * Changed device name to card,device,sub with some info
  * add etc/ to install so autostart gets installed
  * More GUI tweaks for easier understanding
  * Rewrite autojack as a python daemon
  * Rewrite ubuntustudio-controls to talk to new daemon
  * Add USB device hotplug detect
  * Fix README and remove some comments
  * udev detection should ignore non-usb devices
  * Ubuntu now uses systemd to start ondemand
  * Switched to git
  * Use USB if plugged in at session start
  * session start works the same as if usb plugged later
  * fixed lots of corner cases
  * kill_slave no longer assumes device,0,0
  * added cadence to Conflicts
  * Added soft reconfig many things don't restart jack
  * Bridged devices may have more than 2 channels
  * always rebuild usb master list before showing
  * Stop or Start Jack keeps state over reboot
  * start autojack backend if not running
  * Add missing depends
  * nohup is too slow, removed
  * default internal should be slaved when starting with USB master
  * if ~/.log does not exist yet, create it
  * switched autojack to python3 so we just rely one python3
  * Added man pages

  [ Simon Quigley ]
  * Run wrap-and-sort.
  * Update Standards-version to 4.2.0, no changes needed.
  * Bump debhelper compat to 11, no changes needed.
  * Modernize the copyright file.
  * Make Vcs-* and Homepage current.
  * Fix the description.

  [ Ross Gammon ]
  * Drop duplicate "Section" field in debian/control
  * New version ready for upload (LP: #1785418)

 -- Simon Quigley <tsimonq2@ubuntu.com>  Sat, 11 Aug 2018 21:30:07 -0500

ubuntustudio-controls (1.4) artful; urgency=medium

  [ Len Ovens ]
  * Added an option to change CPU governor (LP: #1678316)

 -- Ross Gammon <rosco2@ubuntu.com>  Fri, 21 Apr 2017 17:51:39 +0200

ubuntustudio-controls (1.3) wily; urgency=medium

  * Minor graphical fixes.
  * Make sure user membership in group audio is not confused with
    membership in other groups which names begin with "audio".

 -- Kaj Ailomaa <zequence@mousike.me>  Thu, 03 Sep 2015 11:27:43 +0200

ubuntustudio-controls (1.2) wily; urgency=medium

  * added dependency to jack, as -controls only adjusts privilege for
    jack anyway.
  * added backup file of /etc/security/limits.d/audio.conf, supplied
    by the debian package, but which may be missing otherwise.

 -- Kaj Ailomaa <zequence@mousike.me>  Wed, 19 Aug 2015 13:02:38 +0200

ubuntustudio-controls (1.1) wily; urgency=medium

  * Esthetic changes to the gui, and corrected text in one of the
    dialogues.

 -- Kaj Ailomaa <zequence@mousike.me>  Wed, 19 Aug 2015 12:46:56 +0200

ubuntustudio-controls (1) wily; urgency=medium

  * Application rewritten from scratch. Current features are:
    1) enable/disable rtprio and memlock in pam settings file
    2) add/remove users from audio group

 -- Kaj Ailomaa <zequence@mousike.me>  Tue, 18 Aug 2015 12:16:57 +0200

ubuntustudio-controls (0.4.7) lucid; urgency=low

  [Ricardo Lameiro]
  * Changed glade gui to a gtkbuilder gui

  [Eric Hedekar]
  * put raw1394 rule into its own file (LP #455239)

 -- Eric Hedekar <afterthebeep@gmail.com>  Thu, 28 Jan 2010 03:25:44 -0800

ubuntustudio-controls (0.4.6) karmic; urgency=low

  * Remove dontzap (functionality subsumed by GNOME prefs)

 -- Daniel T Chen <crimsun@ubuntu.com>  Sun, 09 Aug 2009 16:44:43 -0400

ubuntustudio-controls (0.4.5) karmic; urgency=low

  [ Thomas E Jenkins ]
  * Ensure lock file is removed on window close. (LP: #395807)

  [ Luke Yelavich ]
  * Adjust package install files to pick up files in site-packages, as
    python-support moves them to where they need to be anyway.

 -- Thomas E Jenkins <thomas.jenkins@gmail.com>  Sun, 05 Jul 2009 14:47:35 -0400

ubuntustudio-controls (0.4.4ubuntu1) jaunty; urgency=low

  * Fixed writing/rewriting raw1394 permission issue LP: #360895

 -- Eric Hedekar <afterthebeep@gmail.com>  Mon, 13 Apr 2009 22:21:03 -0700

ubuntustudio-controls (0.4.4) jaunty; urgency=low

  * Fixed raw1394 for Jaunty's new udev rules. Thanks to Eric Hedekar
    <afterthebeep@gmail.com>.

 -- Luke Yelavich <themuso@ubuntu.com>  Tue, 07 Apr 2009 18:17:23 +1000

ubuntustudio-controls (0.4.3) jaunty; urgency=low

  * build with DH_PYCENTRAL=include-links so that the module is available
    during the upgrade (ubuntustudio-audio uses it), LP: #346101

 -- Michael Vogt <michael.vogt@ubuntu.com>  Fri, 27 Mar 2009 10:23:26 +0100

ubuntustudio-controls (0.4.2) jaunty; urgency=low

  * correct version for dontzap dependency

 -- Luke Yelavich <themuso@ubuntu.com>  Thu, 05 Mar 2009 10:03:57 +1100

ubuntustudio-controls (0.4.1) jaunty; urgency=low

  * adjust for python 2.6 transition

 -- Luke Yelavich <themuso@ubuntu.com>  Wed, 04 Mar 2009 16:21:43 +1100

ubuntustudio-controls (0.4) jaunty; urgency=low

  * Added DontZap option for x.org (LP: #329150)
  * Removing missing translations from .desktop file. (LP: #322757)
  * Modify raw1394 permissions to work with new layout.

 -- Andrew Hunter <andrew@aehunter.net>  Mon, 16 Feb 2009 21:52:41 -0500

ubuntustudio-controls (0.3.1) intrepid; urgency=low

  * Fixed a typo causing a crash in seralize_settings (LP: #269389)
  * Fixed lintian warnings:
   + Upped debhelper version requirement to (>= 5.0.51~)
   + Rephrased descriptions in debian/control

 -- Andrew Hunter <andrew@aehunter.net>  Tue, 16 Sep 2008 15:30:12 -0500

ubuntustudio-controls (0.3) intrepid; urgency=low

  * Fixed raw1394 warning being shown at startup.
  * Added support for setting the 'niceness' of audio processes. (LP: #230115)
  * Added support for loading raw1394 at boot.
  * Fixed crash if seralize_settings() was not initialized. (LP: #194835)

 -- Andrew Hunter <andrew@aehunter.net>  Fri, 29 Aug 2008 20:55:40 +0100

ubuntustudio-controls (0.2) hardy; urgency=low

  * Added support for changing raw1394 from group 'disk' to group
    'video'.
  * Added persistence support so that values remain between instances.

 -- Andrew Hunter <andrew@aehunter.net>  Wed, 13 Feb 2008 18:37:17 -0500

ubuntustudio-controls (0.1) hardy; urgency=low

  * Initial Release. (LP: #184586)

 -- Andrew Hunter <andrew@aehunter.net>  Thu, 10 Jan 2008 17:04:04 -0500
